+

Service Details


LPro AIO Passcode - Passcode Bypass iOS 15 without JB iPad Pro 9.7 ( A1673 , A1674 & 1675 )

  • Delivery Time : 1-15 Minutes
  • Price : -
  • Details :

    NEW UPDATE DOESNT REQUIRE DCSD - NO NEED DCSD for A10/A11 Devices Only.


    Guide (AUTO METHOD ONLY) :
    Step 1: Connect Device in "RECOVERY MODE"
    Step 2: Use "Boot To DFU Mode" Button to Boot DFU (DO NOT SKIP)
    Step 3: Click "Purple Mode" Button

    This Step NO NEED DCSD for iPhone 7-X (A10/A11)
    DCSD for iPads and iPhone 6s, 6s Plus Needed
    After Successful Write, Device Automatically Enters Recovery Mode

    Step 4: Use "Boot To DFU Mode" Button to Boot DFU (DO NOT SKIP)
    Step 5: Click "Run PwnDFU" Button
    Step 6: Click "Boot Device" Button
    Step 7: Click "Check SSH"
    (Wait for the Button to light up to become this Check SSH ✔️)
    Step 8: Click "HELLO BYPASS"

    Wait for the Device to turn on and the Device is Successfully Activated
    —————————————————————

    Guide (MANUAL METHOD ONLY) :
    Step 1: Connect Device in "NORMAL MODE"
    It Will Show Serial To Change Manually
    Step 2: Connect Device in "RECOVERY MODE"
    Step 3: Use "Boot To DFU Mode" Button to Boot DFU (DO NOT SKIP)
    Step 4: Click "Purple Mode" Button

    You Can Connect DCSD Now and Click OK or Click Close.
    Click Close and Connect DCSD Cable for Manual Methods

    Step 5: Open MagicCFG or Any Tool to Edit Serial You Copied in Step 1

    PLEASE VERIFY IF SERIAL CHANGED SUCCESSFULLY and Proceed Next Step Carefully. Read Device info in Normal Mode to verify Serial Change.

    Step 6: Click "Hello Bypass" Button in Normal MODE FIRST (DO NOT SKIP)
    This Checks if Device Data is OK For Bypass. Proceed Next Step After Success Message.

    Step 7: Connect Device in "RECOVERY MODE"
    Step 8: Use "Boot To DFU Mode" Button to Boot DFU (DO NOT SKIP)
    Step 9: Click "Run PwnDFU" Button
    Step 10: Click "Boot Device" Button
    Step 11: Click "Check SSH"
    (Wait for the Button to light up to become this Check SSH ✔️)
    Step 12: Click "HELLO BYPASS"

     

    TOOL LINK

    https://mega.nz/folder/E1AXhKTL#sulaWt1HyVs2bA8EGcNE9g

Powered By NAKSH-SOFT